When I first started really getting into photography, the thought of underwater photos intrigued me. “How amazing it would be to capture images underwater,” I thought to myself. So I started researching exactly how one might go about putting their camera underwater, because lets be honest, this setup surely wasn’t going to do the trick (and yes, that’s one of my many beautiful cats lounging on my countertop).
But upon typing in my search inquiry, my heart sank. It looked as though there were two options: 1.) A camera bag and 2.) A housing facility. The camera bag, priced at the low end of the spectrum (roughly $100-$150), seemed to better fit my budget, but after reading the horrible reviews every bag received (“Hugely susceptible to human error”, “Leaked the first time I tried it in my bathtub”, “Leaks if placed lower than 1′ of water”, “Leaks because it’s Tuesday” ) I decided against it. I needed something substantial that put one of my most valuable possessions in as little of harm’s way as possible.
So next I took a look at housings.
For a 5D Mark II, underwater housing starts at roughly $1500 and goes up from there. $1500? I was nowhere near being able to afford $1500! I slammed my computer shut and thought to myself, “It’s okay. I just need to save up some money before I can start taking underwater photos. I can live with that.”
Except I couldn’t live with that. The thought burrowed into the back of my brain and wouldn’t leave. “Does this mean only people with $1500 lying around should be able to take underwater photos?” The more I was told I couldn’t take the pictures without proper equipment, the more I became obsessed with it. “There just had to be a way…”
And that way, I decided, was to make my own housing. I figured I could devise a structure that would allow me to put my camera inside, and I could use an automatic shutter release to take the photos from the outside. As long as all my settings were adjusted before I put the camera underwater…it was possible. So I recruited the help of my boyfriend’s step-dad, Scott, and we started to build.
The first prototype was part of an insulated cooler. I needed to have a removable lid so I could take my camera in and out. I figured we’d cut the bottom out, replace it with Plexiglas and seal any spots where water could get in. Seemed simple enough, right?
Not even close. As soon as I reached a depth over 3′ deep the Plexiglas popped off the bottom like a dandelion head. Apparently I had completely underestimated the amount of water pressure I’d be dealing with here…
Some adjustments had to be made. Instead of sealing the Plexiglas on the inside of the container, we sealed it on the outside. By pushing the small disc against the contraption to which it was already attached, the water pressure was working with me instead of against me. There were still some issues with the lid leaking (as per the water-soaked dive weights inside), so I thought an extra dose of duct tape might do the trick for now.
How wrong could I be. The bottom seemed solid, but water was still rushing in from the top. Since I couldn’t find an O-ring large enough to fit inside, I tried everything else: thread tape, weather stripping, plenty of silicone and countless other options. Sealing from the inside certainly wasn’t going to do the trick.
So we opted for an outside option instead. We tried a variety of rubber options with a combination of pipe clamps. We even tried an old bike tire, but it turned out that it wasn’t even remotely waterproof (who would’ve thought?).
Plus, water was slowly leaking in through the Plexiglas window. Somehow, it was coming in through the lid, seeping down through the insulation and coming back out through the bottom. I needed to start from scratch.
Instead of starting with something already built, I decided to design something myself. When I met with Scott that night, he showed me some of the designs he had drawn up and they ended up being almost identical to what I was thinking in my head. Since my camera measured a little more than 6″ across, I knew that would be my rough estimate of a sizing option.
The available pipe options I had locally went from 6″ to 8.5″. We took a chunk of 8.5″ pipe, a chunk of coupling and sanded some Plexiglass to barely fit into the rim of the coupling. We sealed it, placed the pipe on top, sealed it with AVS glue and used a rubber pipe cap and pipe clamp as the lid. This had to work. It was just too pretty not to!
Off to the pool I went (thanks to the Comfort Inn for constantly letting me use their pool over the last few months!) hoping this would be the one.
And the result?
It worked! It worked, it worked, IT WORKED! Thanks Scott for all your help, and be sure to click here if you want to see my first round of underwater photos :)!
Now to make a list of all the things I can put underwater…